Coater,Coating Machine,Lithium Battery Production Line
1, Equipment performance:
1) Coating mode: intermittent and continuous transfer coating can be realized;
2) The retracting, unwinding and machine head roller mounting plate is a reinforced integral vertical plate;
3) Intermittent implementation mode: servo motor to push the back roller;
4) Knife adjustment mode: the use of imported displacement sensor detection, servo motor drive, the formation of automatic closed-loop adjustment scraper gap (optional);
5) With head and tail thickness adjustment function;
6) Drying channel: the length of each section of the oven is 3m, and the upper and lower semi-cycle blowing method of electric heating is adopted, and the air volume is controlled by frequency conversion;
7) Automatic tension and correction control;
8) NMP solvent concentration detection and alarm (optional) in the drying channel;
9) Install an online ray thickness detection system (optional);
10) Coater overall size L*W*H, 26000*2500*2600mm (18m oven - adjustable)
2. Equipment overview:
1) Maximum coating width: 650mm
2) Substrate thickness: aluminum foil: 12-50μm, copper foil: 7-50μm
3) Coating dry thickness: 50-200μm
4) Coating speed: ≤12m/min (according to the length of the oven and the customer process)
5) Temperature control accuracy: ≤± 1 °C
6) Single-sided coating dry thickness error: ±2μm
7) Coating length, front and back coating overlap error: ±0.5mm
8) Unwinding edge neatness error: ±0.5mm
9) Maximum diameter specification of winding: coil diameter MAXΦ650mm
Product Tags:
|
|
50μM Coil Lithium Ion Battery Pack Assembly Line Production Line Battery Coating Machine Images
|
